InsightFacility Manual

Upgrading Other Device Firmware
It is possible to upgrade a device's firmware through the InsightFacility web application.
NOTICE
RISK OF EQUIPMENT DAMAGE
n
Consult the device’s Owner’s Guide when changing the device’s settings.
n
Make sure the device connected on the Xanbus or Modbus network is in Standby
mode before changing settings.
n
Do not change any settings unless you are familiar with the device.
Failure to follow these instructions can result in equipment damage.
Figure 22Sample Device Overview screen - List display
To obtain the firmware package:
1. From a laptop computer, open a web browser.
2. Go to http://solar.schneider-electric.com and download the latest version of the
correct device firmware (contained in a ZIP file).
3. Navigate to the appropriate product page.
4. Click DOWNLOADS > Firmware >FWYYYYMMDD-Product NameVX.XX
BNXXXX (Product Number).ZIP.
5. Pick the firmware version (V) with a higher number and also a higher build number
(BN). The ZIP file is approximately 6 MB.
6. Extract the .xf0 file from the ZIP file into a folder on the local drive.
To upgrade a device firmware:
1. In the main menu bar, click Devices.
2. Put the device in to Standby mode first (if the device is an inverter, this will stop
power production).
a. Click a device you want to put in to Standby mode.
b. Click Configuration>Controls.
Note that Controls may be called differently such as AGS Control.
c. Search for the control setting Operating Mode.
d. Select Standby.
e. Click Apply.
InsightFacility Owner's Guide Getting Started
47 990-91411A