InsightFacility Manual
Table Of Contents
- Safety Information
- Audience
- About
- Overview
- Installation
- Getting Started
- Configuring Devices
- Monitoring
- Troubleshooting
- Specifications
- Installing the InsightFacility Security Certificate
Connecting and Configuring Modbus Devices
NOTE:For Modbus map information, contact Schneider Electric.
Connect Modbus wires to pins 16, 18, and 20 (see Physical Features), and then
complete the following steps in the InsightFacility web application:
1. Go to Setup > Configuration > Modbus Settings.
2. Complete the Serial Port setup and then click Apply.
3. Go to Home > Setup > Device Detection.
4. Under Range, enter a Modbus address range and then click Detect.
5. Go to Devices and then select a device.
6. Go to Configuration and configure the device. Repeat steps 5 and 6 for each device.
InsightFacility Owner's Guide Configuring Devices
51 990-91411A