InsightFacility Manual
Table Of Contents
- Safety Information
- Audience
- About
- Overview
- Installation
- Getting Started
- Configuring Devices
- Monitoring
- Troubleshooting
- Specifications
- Installing the InsightFacility Security Certificate
Configuring an AC-Coupled System
This procedure describes how to associate a PV inverter's point of coupling in an AC-
coupled system.
To configure an AC-coupled system:
1. In the main menu bar, click Devices and then select the device type from the left
menu.
2. On the device page, select Configuration and then click Advanced Device
Settings.
3. From the drop-down menu, select either Load or Grid (depending on how your
system is set up).
Configuring the Grid Code Region
Note: This procedure is for authorized personnel only. Changing this setting will modify
the Region Settings for all devices in the system.
To configure the grid code region:
1. Log in to the InsightFacility web application.
2. Go to Setup > Region Settings, and type your password.
Configuring Devices InsightFacility Owner's Guide
990-91411A 58