Specifications

solar.schneider-electric.com
Mini PDP
Conext XW Power Distribution Panels
Conext™ XW+ Power Distribution Panels (XW+ PDP and Mini PDP) are factory-wired and
labeled to support the integration of multiple Conext XW+ inverter/chargers and Conext
MPPT Solar Charge Controllers with a single battery bank. The XW+ PDP and Mini PDP
ships with breakers, bus bars and cables to install a single XW+ inverter/charger. With
space to add wiring and breakers, a single XW+ PDP and Mini PDP supports one XW+
inverter/charger, a diesel generator and either a MPPT 80 600 or MPPT 60 150 Solar
Charge Controller. The XW+ PDP and Mini PDP supports single-phase, split phase, or
three-phase installations. A field-reversible door and multiple conduit knockout entry
points allow for the XW+ PDP and Mini PDP enclosure to be mounted and configured on
either side of the inverter/charger.
XW+ Power Distribution Panels are designed to save significant time and money during
installation, when compared to custom solutions. A mounting bracket and Conext XW+
Conduit Box are also supplied with each XW+ PDP and Mini PDP.
Save time and money installing and integrating XW+ system
XW+ Conduit Box
XW+ Installation Kit
for INV 2 INV 3 PDP
XW+ Power Distribtution Panel
Why choose a Conext XW Power Distribution Panel?
Higher return on investment
• Integrate multiple XW+ inverter chargers and MPPT Solar Charge
Controllers with a single battery bank
• Repeatable standard installation that saves time and money
Flexible
• Single-phase split-phase or three phase systems
• Multiple field configurable conduit entry points on the back, bottom, top
and sides
• DIN Rail mounting for QOU type and Multi-9 AC breakers
Easy to service
• Breaker configuration allows XW+ inverter/chargers to be AC bypassed
for servicing
• Field-reversible door panel allows for visual inspection
Easy to install
• Wall mount with included bracket
• Add additional XW+ inverter chargers with Conext XW+ connection kit
Device short name XW Mini PDP
Product dimensions (H x W x D) 47.0 x 40.6 x 22.5 cm (18.5 x 16 x 8.9 in) *24.9" door swing clearance, measured from back of unit.
Shipping dimensions (H x W x D) 53.5 x 56.5 x 33 cm (21.0 × 28.6 × 13.0 in)
Shipping weight 13kg 28.2lb
Product number 865-1013-01
Included XW+ Mini-PDP enclosure with a field-reversible panel door and integrated wall mounting bracket
Three 60 A, 120/240 Vac, two-pole, Square-D QOU260, DIN-rail mounted AC breakers for AC input, bypass and AC
load (factory-installed), plus one additional expansion position for two pole AC breaker, type QOU260. Mini-PDP AC
Cabling is pre-wired/pre-measured for easy installation to XW+ unit.
One GJ 250A 160 Vdc DC breaker installed
Two expansion positions for charge controller DC breakers (PV array or battery)
Termination lugs for gro un d , c o m m o n a n d b a t t e r y c o n n e c t i o n s
Integrated DC busbars for direct connection to XW+ DC terminals.
3/8" hardware for connection of DC cables to busbars
Cable ties for cable management
Quick start guide
Additional Breaker labels
Plastic knockout bushings for connection between Mini-iPDP and XW/XW+ unit.
Document holder
Sized for easy cable installation and management