Instruction Manual

Monitoring Charge Controller Operation
975-0400-01-01 Revision H 4–13
This manual is for use by qualified personnel only.
Viewing Logged System Data
The solar charge controller stores accumulated operating data for viewing on the
History menu. You can also reset some of the logged data on the History menu.
On the History Menu you can view logs for daily, monthly, or lifetime power
production.
Figure 4-4 History Menu
Table 4 - 7 History Menu Items
Item Description

Press Enter to view the Daily logs (see page 4–14). Each
Daily log contains the day’s accumulated Watt-hours,
Amp-hours, and the peak watts recorded that day.

Press Enter to view the Monthly logs (see page 4–14).
Each Monthly log contains 30 days of accumulated Watt-
hours, Amp-hours, and the peak watts recorded during
that 30-day period.
 

Displays the total Amp-hours and kilowatt-hours
produced since the last screen reset. You can reset
these totals by selecting Total on the Clear History
screen.
 

Displays the total kilo-amp-hours and kilowatt-hours
produced since installation. These totals cannot be reset.


Resets logged information to zero. Options available are
Daily Logs, Monthly Logs, Total, All. You can clear all the
daily logs and all monthly logs. You cannot clear logs for
individual days and months.





 

 

Enter Exit
 

 



Exit
En t e r
Exit
En t e r
= Advanced menu

