Instruction Manual

Configuring the Auxiliary Output
975-0400-01-01 Revision H 3–13
This manual is for use by qualified personnel only.
Configuring the Auxiliary Output
The Aux Menu allows you to enable and configure the auxiliary output. The
auxiliary output provides between 5 and 13 volts DC (configurable) and up to
200 milliamps to power a relay, indicator light, vent fan, or alarm.
The Aux Menu is an Advanced Menu item. To display the Aux Menu, go to the
Display Menu, view the Display Mode screen and select Advanced. See
“Configuring the LCD” on page 3–17.
Figure 3-5 Aux Menu
Table 3 - 5 Aux Menu Values
Setting Values Default Description


Manual Off,
Manual On,
Automatic
Manual
Off
Sets the operating mode for
the auxiliary output. When set
to Automatic, the auxiliary
output will turn on or off
according to the selected
Trigger Source. You can turn
the auxiliary output on or off at
any time by selecting
ManualOn or ManualOff.
Advanced menu
=


  


 



  



Enter Exit
Appears if a related setting
is enabled or as allowed
by the installation
=