Installation Guide

FCC Information to the User
This charge controller has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules and Industry Canada ICES-003.
These limits are designed to provide reasonable protection against harmful interference
when the charge controller is operated in a residential environment. This charge controller
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the installation and operation guides, could cause harmful radio
frequency interference with radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this charge controller does cause
harmful interference with radio or television reception, which can be determined by
turning the charge controller off and on, try to correct the interference by one or more of
the following measures:
n Reorient or relocate the receiving antenna.
n Increase the separation between the charge controller and the receiver.
n Connect the charge controller to a different circuit from that to which the receiver is
connected.
n Consult the dealer or an experienced radio or TV technician for help.
CAUTION
RISK OF INJURY
Unauthorized changes or modifications to the equipment could void the user’s authority to
operate the equipment.
Failure to follow these instructions can result in injury or equipment damage.
Safety Information Conext MPPT 80 and MPPT 100 Installation Guide
990-91319 This document is for use by qualified personnel 10