Installation Guide

Figures
Figure 1 Typical Installation 21
Figure 2Minimum Clearance Requirements 26
Figure 3Removing the wiring compartment cover 26
Figure 4Wiring Compartment with Lexan Barrier 27
Figure 5Knockout dimensions 28
Figure 6Dimensions and knockout locations 28
Figure 7Mounting the Charge Controller 29
Figure 8Chassis ground connector 30
Figure 9DC Terminal Connector Locations 31
Figure 10Typical Wiring Diagram for a Negative-Grounded System (48 V Battery Bank
Shown) 36
Figure 11Multiple unit DC wiring 38
Figure 12Auxiliary output vent fan application 39
Figure 13Network terminator 40
Figure 14Network layout 41
Figure 15Attaching the BTSto a battery terminal 43
Figure 16Installing the BTS 44
Figure 17MPPT Operational Window 58
Figure 18Maximum Expected Output Current Versus Input Voltage, Conext MPPT 80
600 59
Figure 19Maximum Expected Output Current Versus Input Voltage, Conext MPPT
100 600 59
Figure 20Output power vs. ambient temperature, Conext MPPT 80 600 62
Figure 21Output power vs. ambient temperature, Conext MPPT 100 600 62
Conext MPPT 80 and MPPT 100 Installation Guide
990-91319 This document is for use by qualified personnel 14