Installation Guide

Audience
This manual is intended for use by qualified personnel installing a system involving
Schneider Electric Conext MPPT 80 and MPPT 100 Solar Charge Controller.
The qualified personnel have training, knowledge, and experience in:
n Installing electrical equipment and PV and battery input systems (up to 1000 V).
n Applying all applicable installation codes.
n Analyzing and reducing the hazards involved in performing electrical work.
n Selecting and using Personal Protective Equipment (PPE).
Configuration, servicing, and maintenance must be performed by authorized service
personnel only. Authorized service personnel meet the requirements for a qualified installer,
plus they have received specific training from the manufacturer on servicing the Conext
MPPT 80 or MPPT 100 Solar Charge Controller.
This manual does not contain information regarding servicing or de-energization for
servicing. Authorized service personnel must refer to the system schematics to identify,
open, lock-out and tag-out, and verify de-energization of all power sources.