Owner's Guide
Table Of Contents
- Audience
- Safety Information
- Introduction
- Configuration
- Operation
- Troubleshooting
- Specifications
- Conext System Control Panel Menus
- Boost Charging
Conext Gateway
The Conext Gateway allows you to configure, view system information and operating
status of the charge controller using a web application on a PC or laptop. For more
information, see the Conext MPPT 80 and MPPT 100 Owner's Guide.
To view status information:
1. Log in to the Conext Gateway web application.
2. Go to Devices >Charge Controller, and then select your charge controller.
3. Verify that the Status tab is selected.
Figure 8Conext Gateway Charge Controller Status screen
Note:This image is for illustrative purposes only.
Operation Conext MPPT 80 and Conext MPPT 100 Owner’s Guide
990-6214B This document is for use by qualified personnel 47