Owner's Guide

Viewing Harvest Logs
The SCP displays the daily, monthly, and yearly performance logs stored on the charge
controller.
Note:
To record monthly and yearly logs, the charge controller must be connected to a real-time
clock source. Make sure the charge controller is attached to the Xanbus network with at
least one of the following:
n Conext XW+ or Conext XW Pro Inverter/Charger
n Conext System Control Panel
n Conext Gateway
SCP
Device
Menu
Item Description
Setup >
Harvest
Logs
Daily
Logs
Displays a log of the charge controller’s amp-hour and kilowatt-hour production for the day as well as
the peak power output and time in float for the day.
Setup >
Harvest
Logs
Monthly
Logs
Displays a log of the aggregate total for amp hours and kilowatt hours produced during the month as
well as the peak power output and time in float for the month.
Setup >
Harvest
Logs
Yearly
Logs
Displays a log of the aggregate total for amp hours and kilowatt hours produced during the year as
well as the peak power output and time in float for the year.
Table 18Harvest logs menu items
Daily Logs
To view the daily logs, go to Setup > Harvest Logs. From the Daily Logs screen, press
Enter. Press the down arrow button to scroll through the daily logs, starting with the
current date. The charge controller stores up to 62 daily logs.
After 62 days, the oldest daily log is overwritten.
Monthly Logs
To view the monthly logs, go to Setup > Harvest Logs. From the Monthly Logs screen,
press Enter. Press the down arrow button to scroll through the monthly logs, starting with
the current month. The charge controller stores up to 24 monthly logs. After 24 months,
the oldest monthly log is overwritten.
Yearly Logs
To view the yearly logs, go to Setup > Harvest Logs. From the Yearly Logs screen,
press Enter. Press the down arrow button to scroll through the yearly logs, starting with
Conext MPPT 80 and Conext MPPT 100 Owner’s Guide Operation
54 This document is for use by qualified personnel 990-6214B