Schneider Electric AGS User Manual
Installation
2–4 975-0307-01-01 Rev G
Connection
Type s
Because the Conext AGS will be part of a Xanbus network, it is
necessary to consider how to route two types of connections:
• Connections to the generator, thermostats, and other external
devices and switches, using the 20-contact connector and wiring
harness.
• Connections to other Xanbus-enabled devices, using network
cables.
Installing the AGS
Installation
Overview
Installing the Conext AGS involves the following steps:
1. Mounting the unit.
2. Connecting the wiring harness to:
• Generator (page 2–9)
• Trigger contacts such as thermostats (optional) (page 2–26)
• External shutdown switch (optional) (page 2–27)
• External ON/OFF switch and LED (optional) (page 2–27)
3. Connecting the wiring harness to the 20-contact connector on the
Conext AGS.
4. Connecting the Conext AGS to the SCP and other network-enabled
devices (page 2–31).
Figure 2-5 Conext AGS External Connections
Wiring harness (connection
to generator, thermostats,
and external switches)
Network cables to other
Xanbus-enabled devices
20-contact
connector
Network ports
975-0307-01-01_RevG(AGS-Owners).book Page 4 Thursday, August 27, 2015 2:01 PM