Conext SW 4024-120 Install Guide
Table Of Contents
- Conext™ SW Inverter/Charger
- Exclusion for Documentation
- Document Number: 975-0639-01-03 Revision: Date: 5-2020
- Contact Information solar.schneider-electric.com
- Information About Your System
- About This Guide
- Important Safety Instructions
- Safety Information
- Precautions When Working With Batteries
- FCC Information to the User
- Installation
- Materials List
- Conext SW Front and Side Panels
- Conext SW Supplied Accessories
- Conext SW Required Accessory
- Installation Information
- Before You Begin the Installation
- Installation Codes
- Xanbus Network System
- Xanbus System
- Xanbus-enabled Products and Other Accessories
- Installation Planning
- Planning Preparations
- Components of the Inverter Power System
- Unpacking and Inspecting the Conext SW Inverter/Charger
- Installation Tools and Materials
- Inverter/Charger Installation
- Overview
- Step 1: Choosing a Location for the Inverter/Charger
- Step 2: Mounting the Inverter/Charger
- Step 3: Connecting the AC Input and AC Output Wires
- AC System Bonding
- Step 4: Installing the DC Switchgear and Connecting the DC Cables
- Step 5: Connecting the BTS and Xanbus-enabled Components
- Step 6: Performing Checks Prior to Initial Start-Up
- Step 7: Testing Your Installation
- Battery Information
- Battery Bank Sizing
- Estimating Battery Requirements
- Restrictions on Motor Size
- Battery Cabling and Hook-up Configurations
- Specifications
- Inverter Specifications
- Charger Specifications
- AC Transfer Specifications
- Physical Specifications
- Environmental Specifications
- Regulatory
- Wiring Diagrams
- Single-Inverter System (Off-Grid/Power Backup)
- Single-Inverter System Renewable Energy (Solar)
975-0639-01-03 xiii
This guide for use by qualified personnel only
Figure 1-1 Materials List- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–2
Figure 1-2 Conext SW Front and Side Panels- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–3
Figure 1-3 Front Panel Buttons and Status LEDs - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–4
Figure 1-4 AC and DC Terminals, Network and Communication Ports Panel- - - - - - - - - - - - - - - - - 1–5
Figure 1-5 Supplied Accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–6
Figure 1-6 DC Switchgear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–7
Figure 1-7 Xanbus System Diagram Example - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–9
Figure 1-8 AC, DC, and Network Components - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–12
Figure 1-9 AC, DC, and Network Components - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–13
Figure 1-10 Conext SW Mounting Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–21
Figure 1-11 Conext SW AC INPUT and OUTPUT Connections - - - - - - - - - - - - - - - - - - - - - - - - - - 1–24
Figure 1-12 Installing the DC Switchgear- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–26
Figure 1-13 Conext SW DC Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–28
Figure 1-14 Conext SW BTS and Xanbus Connections - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–30
Figure 1-15 Conext SW Front Panel- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–32
Figure 1-16 Batteries Connected in Parallel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–38
Figure 1-17 Batteries Connected in Series- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–39
Figure 1-18 Batteries in Series-Parallel Connections- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1–39
Figure 2-1 Output Power versus Temperature Derating Graph - - - - - - - - - - - - - - - - - - - - - - - - - - 2–5
Figure 3-1 Single-Inverter System (Off-Grid/Backup) Overview - - - - - - - - - - - - - - - - - - - - - - - - - - 3–3
Figure 3-2 Single-Inverter System (Off-Grid/Backup) Wiring - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3–4
Figure 3-3 Single-Inverter System Renewable Energy (Solar) Overview - - - - - - - - - - - - - - - - - - - - 3–5
Figure 3-4 Single-Inverter System Renewable Energy (Solar) Wiring - - - - - - - - - - - - - - - - - - - - - - 3–6
Figures