Conext SW 4024-120 Install Guide

Materials List
975-0639-01-03 1–3
This guide for use by qualified personnel only
Conext SW Front and Side Panels
Before you begin to operate the Conext SW after installation, review the front
panel features shown in Figure 1-3 and described in the next table. A detailed
view of the lights and buttons on the front panel is also shown.
Figure 1-2 Conext SW Front and Side Panels
1
77
3
2
4
6
5
TOP TOP
Item Description
1 Front Panel contains the Inv Enable and Clear Fault | Reset buttons, as
well as various LEDs (status indicator lights). See “Front Panel Buttons
and Status LEDs” on page 1–4.
2 Network and communications ports. See “AC and DC Terminals,
Network and Communication Ports Panel” on page 1–5.
3 DC battery terminals. See “AC and DC Terminals, Network and
Communication Ports Panel” on page 1–5.
4 AC Ground terminals. See “AC and DC Terminals, Network and
Communication Ports Panel” on page 1–5.