Conext SW 4024-120 Install Guide

975-0639-01-03 iii
This guide for use by qualified personnel only
About This Guide
Purpose
The purpose of this Installation Guide is to provide explanations and procedures
for installing the Conext SW Inverter/Charger to a main AC power source such as
an AC generator for off-grid application or AC mains (main power grid) for power
backup application.
Scope
The Guide provides safety and installation guidelines as well as information on
tools and wiring. Complete balance of system installation is not covered. For a
complete balance of system installation using the Conext SW AC Switchgear, DC
Switchgear, and solar charge controllers, consult the Conext SW System Guide.
It does not provide details about particular brands of batteries. You need to
consult individual battery manufacturers for this information.
Audience
The Guide is intended for use by anyone who plans to install an off-grid/backup
system involving the Conext SW Inverter/Charger. The information in this manual
is intended for qualified personnel. Qualified personnel have training,
knowledge, and experience in:
• Installing electrical equipment and PV power systems (up to 1000 volts).
• Applying all applicable installation codes.
• Analyzing and reducing the hazards involved in performing electrical work.
• Selecting and using Personal Protective Equipment (PPE).
Organization
This Guide is organized into:
Chapter 1, “Installation” covers installation instructions.
Chapter 2, “Specifications” covers product specifications.
Chapter 3, “Wiring Diagrams” covers overviews of Conext SW BOS installations
and wiring diagrams.