Conext SW 4048-120 Manual Addendum

Documentation Update
10 976-0315-01-01 Rev E
Accessing the New Features by SCP
The Advanced Settings option gives you access to the full range of CSW
settings, including everything displayed on the Basic menu. As a safeguard
against unintended Advanced configuration, the SCP displays the Basic settings
by default. To view the Advanced settings, you must perform a special keypress.
To select the Advanced Settings menu:
1. On the Select Device menu, select a CSW device.
2. Press Enter. The Setup menu screen appears.
3. Press Enter + up arrow + down arrow at the same time.
4. From the Setup menu, with Advanced Settings highlighted, press Enter. See
Figure 7.
NOTICE
RISK OF DAMAGE TO CONNECTED DEVICES
The advanced settings are intended for qualified installation/service personnel
only. Before changing advanced settings, you must be familiar with the
settings and the system-wide impact of changing those settings. Setting
parameters incorrectly could damage connected equipment (such as
batteries) or could severely affect the performance of your system. Incorrect
charging configuration can lead to battery damage.
Failure to follow these instructions can result in equipment damage.
NOTES:
• This keypress (Enter + up arrow + down arrow) enables the Advanced
settings for every device in the system.
• After performing the keypress, “Advanced Settings” appears at the top of
the Setup menu (see Figure 7).
Figure 7 Selecting Advanced Settings
CSW4024E 00: Setup
Advanced Settings
Meters
Inverter
Search Mode
[Disabled]
[Disabled]
CSW4024E 00: Adv
Inverter Settings
Charger Settings
AC Settings
AC Support
Multi Unit Config
Restore Defaults
Adv Features