Schneider Electric User Guide

Faults and Warnings
975-0240-01-01 4–11
Warning Messages
Warning messages appear on the Conext SCP to alert you to an impending
system change. You can view the 20 most recent warning messages using the
Conext SCP’s warning log, accessible from the View Device Info menu. Each
warning has a time stamp to let you know the date and time that the warning
appeared.
If several warning messages occur before you can acknowledge or clear them,
they are displayed together on a warning list. This list contains messages from
every Xanbus-enabled device, not just the Conext XW+. You can select a
message and view its details from warning list.
To view a message from a warning list:
1. On the list, use the up arrow or down arrow button to highlight the message
you want to view.
2. Press Enter. The complete message appears.
After viewing the message, you can return to the warning list by pressing Exit or
continue to the menu for the device that caused the warning by pressing Enter.
Each time you return to the list after viewing a complete message, the viewed
message is removed from the list.
If you have left the warning list, you can view warnings at any time from the
System Settings menu.
To view a warning list:
1. On the Select Device menu, highlight System and press Enter.
2. On the System Settings menu, highlight View Warning List.
3. Press Enter.
Warning Types
There are two types of warnings: automatic and manual. When the Conext XW+
detects a warning condition, it displays a warning message on the Conext SCP.
Table 4-2 describes how their behavior differs and how you can respond to them
when they appear on the Conext SCP.
Table 4-2 Warning Types and Behavior
Warning type Behavior
Automatic
warning
Clear automatically if the warning condition that generated the message goes
away. You can also acknowledge automatic warnings without waiting for them to
clear automatically.
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 11 Monday, November 27, 2017 10:00 AM