Schneider Electric User Guide

Default Settings
B–2 975-0240-01-01
Default Settings and Ranges
Figure B-1 shows how the advanced Conext configuration menus are organized
in the Conext System Control Panel.
Figure B-1 Configuration Menu Map (Advanced)
XW+ 6848 00:AC
XW+ 6848 00:Inv
XW+ 6848 00: Multi
XW+ 6848 00:Gen
XW+ 6848 00: Aux
XW+ 6848 00:Grid
XW+ 6848 00:Chg
XW+ 6848 00: Adv
Connections
[44V]
[10s]
[2.0V]
[65V]
[50W]
[2s]
[Flooded]
[440Ah]
[100%]
[2-Stage]
[Warm]
[50V]
[180min]
[12:00AM]
[12:00AM]
[AC1]
[60A]
[106V]
[135V]
[55Hz]
[65Hz]
[60A]
[80V]
[138V]
[54Hz]
[65Hz]
[53V]
[Disabled]
[28A]
[Disabled]
[60A]
[12:00AM]
[12:00AM]
[12:00AM]
[12:00AM]
[ManualOff]
[ActHi]
[LowBattV]
[46V]
[1sec ]
[48V]
[1sec ]
[XW6048]
[00]
[SplitPhMstr]
XW+ 6848 00:Adv Features
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[HouseBatt1]
[ACLoad1]
[Grid1]
[Gen1]
[Disabled]
[10A ]
[XW6048 01]
Custom Settings
Custom Settings
[Enabled]
[64.0V]
[57.6V]
[57.6V]
[54.0V]
[108mV/C]
LithiumIon
[EXT_BMS]
[57.0V]
[140A]
[58.0V]
[140A]
[53.6V]
[140A]
[150%]
[10s]
Custom Settings appears when
Batt Type is set to Custom
LithiumIon appears when Batt
Type is set to LithiumIon
These settings appear and
disappear depending on the
type of Control is selected.
See “Custom and Lithium Ion
Battery Settings Sub Menus”
on page 3–21.
Control has three selections
namely: EXT_BMS,
2StageNoFloat, and 3Stage.
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 2 Monday, November 27, 2017 10:00 AM