Schneider Electric User Guide

Monitoring Operation

2–2 975-0240-01-01

Monitoring Operation with the Inverter Information Panel

The inverter information panel on each Conext XW+ monitors a single Conext

XW+. The Conext XW+ information panel displays basic information and

performs start up, shut down, equalization and standby functions. LEDs on the

information panel indicate AC input status, Conext XW+ status, battery condition,

and charging and equalization status. The Conext XW+ LEDs and three-

character display screen indicate warning and event conditions.

Monitoring AC Input Status

Grid (AC1) The green Grid (AC1) LED indicates the presence and status of the

AC source connected to the AC1 input.

Gen (AC2) The green Gen (AC2) LED indicates the presence and status of a

generator or other auxiliary AC source on the AC2 input.

Figure 2-1 Inverter Information Panel

Symbol LED On LED Flashing LED Off

AC input is present and

qualified. The Conext

XW+ is ready to charge

batteries, pass AC

through to the loads, or

interact with the grid.

AC input is

present and is

being qualified.

The Conext XW+ is not

connected to the grid.

AC input is not

present, or AC input is

present but not within

qualifying range.

Symbol LED On LED Flashing LED Off

The AC source is present

and AC input is qualified.

The Conext XW+ is ready

to charge batteries and

pass power through to

the loads.