Schneider Electric User Guide

Monitoring Operation with the Inverter Information Panel
975-0240-01-01 2–3
When one AC input LED is on and the other AC input LED is flashing, AC input is
present on both AC1 and AC2. However, the Conext XW+ can qualify and
receive AC input from only one source at a time. The qualified source is
represented by the steadily lit LED. When two sources of AC input are present,
the Conext XW+ uses the source selected under AC Priority in the AC
Settings menu.
Monitoring Conext XW+ Status
The Green kW LED indicates the Conext XW+ is inverting DC input to AC output.
When this LED is on or flashing, the display screen shows Conext XW+ output
power in kilowatts.
Figure 2-2 Inverter Information Panel When Inverting
Symbol LED On LED Flashing LED Off
The Conext XW+ is
inverting and
generating an AC
output. Display
screen shows
output power in kW.
The Conext XW+
is in Grid Support
mode. Display
screen shows
output power in
kW.
The Conext
XW+ is not
inverting.
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 3 Monday, November 27, 2017 10:00 AM