Schneider Electric User Guide

Monitoring Operation
2–4 975-0240-01-01
Monitoring Charger Status
The green LED labelled “A” indicates the Conext XW+ is charging the battery
bank. When this LED is on, the numeric display screen shows battery charging
current in amps.
Symbol LED On LED Flashing LED Off
The Conext XW+ is
charging the
battery bank. The
numeric display
screen shows
battery charging
current in amps.
AC coupled
charging is
occurring
a
.
May flash in AC
coupled mode
where reverse
current greater
than 3 A is
present.
Multiple units are
connected in
parallel under no
load.
The Conext
XW+ is not in
charge mode.
a.See the document “AC Coupling of Inverters Solutions Guide” available at http://so-
lar.schneider-electric.com for more information about AC coupling.
Figure 2-3 Inverter Information Panel When Charging Battery
Note: When a charge cycle ends or charging is manually disabled, the Conext
XW+ does not leave charge mode immediately, and the charging LED remains
on for 60 seconds.
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 4 Monday, November 27, 2017 10:00 AM