Schneider Electric User Guide

Monitoring Operation with the Inverter Information Panel
975-0240-01-01 2–9
Reading the Display Screen
The numeric display screen shows the following information about the
operational state of the Conext XW+:
• Output power in kilowatts (when the (kW) LED is lit).
• Battery charger current in Amps (when the (A) charging LED is lit).
•  when the Conext XW+ is in Standby mode.
•  when the Conext XW+ is in Search mode. See “Using Search Mode” on
page 3–9.
•  when the
STARTUP/SHUTDOWN button is pressed and held for five seconds.
 is displayed briefly before the unit turns off.
•“” appears when the Conext XW+ is in transition between modes, when
inverter selection is disabled via the SCP or Conext Combox, or operating in
AC passthrough mode (for example, in a multi-cluster configuration).
•  appears momentarily when the Conext XW+ is enabled.
•  appears momentarily when the Conext XW+ is disabled.
• 5 minute countdown timer value may appear if there is no other more
significant information to display after grid interruption during energy export
operation.
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 9 Monday, November 27, 2017 10:00 AM