Schneider Electric User Guide

Monitoring Operation
2–10 975-0240-01-01
Monitoring Operation with the Conext SCP
The Conext System Control Panel (Conext SCP) provides remote configuration
and monitoring capability for the Conext XW+ and all other Xanbus-enabled
devices in the network.
You can monitor Conext XW+ operation on the Conext SCP using the:
• System Status screen (see page 2–14)
• Conext XW+ Home screen (see page 2–14)
• Conext XW+ Meters Menu (see page 2–18).
Conext System Control Panel Features
Feature Description
1 Event/Warning light indicates a device on the system has a fault or
warning condition and requires attention. The light flashes when a
warning occurs and turns on steadily when a fault occurs.
2 Enter button confirms selection of a menu item or displays the next
screen.
3 Up arrow button scrolls upwards through screen text or increases a
selected value.
4 Down arrow button scrolls downwards through screen text or
decreases a selected value.
5 Exit button cancels selection of a menu item or displays the previous
screen.
6 Display shows menus, settings, and system information.
7 Standby button disables inverting and charging on all Conext XW+
units in the system when pressed for one to two seconds. To enable
inverting and charging, press the Standby button again.
Standby
Event/Warning
Conext XW SCP
1
2
3
45
7
6
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 10 Monday, November 27, 2017 10:00 AM