Schneider Electric User Guide

Monitoring Operation
2–18 975-0240-01-01
Reading the Meters Screen
The Meters screen displays total system power production, grid voltage and
current status, and load voltage and current status.
To view the Meters screen:
• On the Conext XW+ setup menu, highlight Meters and press Enter.
Figure 2-8 Viewing the Meters Screen
Table 2-2 Meters Screen
Screen Item Description
AC1 AC input power connected to the Conext XW+ AC1 terminals, in volt-amps and watts.
AC1 is assumed to be connected to the utility grid, but can be connected to any other
AC source.
AC1 in L1 AC input voltage and current connected to the Conext XW+ AC1 L1 terminals. This input
voltage display may drift slightly before the Conext XW+ has synchronized to the grid.
AC1 in L2 AC input voltage and current connected to the Conext XW+ AC1 L2 terminals. This input
voltage display may drift slightly before the Conext XW+ has synchronized to the grid.
AC1 Freq AC frequency connected to the Conext XW+ AC1 terminals.
AC2 AC input power connected to the Conext XW+ AC2 terminals, in volt-amps and watts.
AC2 is assumed to be connected to a generator, but can be connected to any other AC
source.
AC2 in L1 AC input voltage and current supplied to the Conext XW+ from the AC2 L1 input. This
meter indicates the Conext XW+ is drawing power from the generator to charge the
battery or power the AC loads.
AC2 in L2 AC input voltage and current supplied to the Conext XW+ from the AC2 L2 input. This
meter indicates the Conext XW+ is drawing power from the generator to charge the
battery or power the AC loads.
XW+ 6848 00: Meters
4500VA 3200W
21.1A 120V
21.1A 120V
60Hz
0VA 0W
0.0 A0V
0.0 A0V
0Hz
4500VA 3200W
21.1A 120V
21.1A 120V
60Hz
Float
3.7A 57.4V
20 ° C
XW+ 6848 00: Setup
Meters
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Bulk]
[Disabled]
[Operating]
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 18 Monday, November 27, 2017 10:00 AM