Schneider Electric User Guide

Using the Setup Menus
975-0240-01-01 3–7
Figure 3-3 Basic and Advanced Settings
XW+ 6848 00:AC
XW+ 6848 00:Inv
XW+ 6848 00: Multi
XW+ 6848 00:Gen
XW+ 6848 00: Aux
XW+ 6848 00:Grid
XW+ 6848 00:Chg
XW+ 6848 00: Adv
Connections
[44V]
[10s]
[2.0V]
[65V]
[50W]
[2s]
[Flooded]
[440Ah]
[100%]
[2-Stage]
[Warm]
[50V]
[180min]
[12:00AM]
[12:00AM]
[AC1]
[60A]
[106V]
[135V]
[55Hz]
[65Hz]
[60A]
[80V]
[138V]
[54Hz]
[65Hz]
[53V]
[Disabled]
[28A]
[Disabled]
[60A]
[12:00AM]
[12:00AM]
[12:00AM]
[12:00AM]
[ManualOff]
[ActHi]
[LowBattV]
[46V]
[1sec]
[48V]
[1sec]
[XW6048]
[00]
[SplitPhMstr]
XW+ 6848 00:Adv Features
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[HouseBatt1]
[ACLoad1]
[Grid1]
[Gen1]
[Disabled]
[10A]
[XW6048 01]
Custom Settings
Custom Settings
[Enabled]
[64.0V]
[57.6V]
[57.6V]
[54.0V]
[108mV/C]
LithiumIon
[EXT_BMS]
[57.0V]
[140A]
[58.0V]
[140A]
[53.6V]
[140A]
[150%]
[10s]
Advanced Settings
Basic Settings
Note: The Conext System Control
Panel displays only four lines of
each configuration menu at one
time. To view additional settings,
press the down arrow button.
XW+ 6848 00:Basic
Batt Type
[Flooded]
[440Ah]
[100%]
[2-Stage]
[50V]
[AC1]
[60A]
[60A]
[54V]
[44V]
LithiumIon is displayed only
when Custom is selected as the
Batt Type.
Eqlz Voltage is displayed only
when
Eqlz Support is Enabled.
Trigger and Clear settings are
displayed only when Automatic is
selected under Manual Aux.
Custom Settings is displayed
only when Custom is selected as
the
Batt Type.
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 7 Monday, November 27, 2017 10:00 AM