Schneider Electric User Guide

About This Guide
iv 975-0240-01-01
Organization
This Guide is organized into four chapters and three appendices.
Chapter 1, “Introduction”, describes the operational features of the Conext XW+
Inverter/Charger.
Chapter 2, “Monitoring Operation”, contains information about monitoring Conext
XW+ Inverter/Charger operation using the inverter information panel or the
Conext System Control Panel.
Chapter 3, “Configuration” explains how to navigate through the Conext System
Control Panel menus and configure the Conext XW+ Inverter/Charger.
Chapter 4, “Troubleshooting”, contains information and procedures for identifying
and solving possible problems with the Conext XW+ Inverter/Charger.
Appendix A, “Specifications” provides the electrical and mechanical
specifications for the Conext XW+ Inverter/Charger.
Appendix B contains the default configuration settings and ranges for the Conext
XW+ Inverter/Charger. Configuration settings can be viewed and changed using
the Conext System Control Panel.
Abbreviations and Acronyms
Related Information
For information about installing the Conext XW+ Inverter/Charger, see the Conext
XW+ Inverter/Charger Installation Guide (975-0384-01-02).
You can find more information about Schneider Electric as well as its products
and services at http://solar.schneider-electric.com.
For available accessories, see “Available Conext XW+ Accessories” on page 1–
3.
CEC California Energy Commission
CSA Canadian Standards Association
GT Grid Tie
LCD Liquid Crystal Display
LED Light Emitting Diode
MPPT Maximum Power Point Tracking
NEC US National Electrical Code NFPA-70
PV Photovoltaic
PVGFP PV Ground Fault Protection
UL Underwriters Laboratories
VAC Volts AC
VDC Volts DC
Conext XW+ Owner's Guide NA (975-0240-01-01).book Page iv Monday, November 27, 2017 10:00 AM