Schneider Electric User Guide

Configuration

3–46 975-0240-01-01

For default settings, see “Connections Menu” on page B–6.

Table 3-11 Connections Menu

Item Description

DCConn DC input and output connection. This is the common DC connection

shared between the Conext XW+, charge controllers, and referenced

by the Conext Automatic Generator Start.

ACOut AC output connection. This connection specifies a common AC

output connection shared between Conext XW+ units. The AC output

connection has to be configured so that the units know if they are

connected to the same load or not. If connected to the same load,

select the same name on all units; for example, “ACLoad1.” If

connected to separate load banks, use different names for the AC

output connection on each unit; for example, “ACLoad1” on one unit

and “ACLoad2” on the other.

AC1 AC1 input connection. This connection specifies a common

AC port 1 input for multiple Conext XW+ units.

AC2 AC2 input connection. This connection specifies a common

AC port 2 input for multiple Conext XW+ units.

Figure 3-11 Conext XW+ Connections Representation

L1 N L2 L1 N L2 L1 N L2

LOAD

GRID

(AC1)

GEN

(AC2)

AC OUT AC IN AC IN

DC Connection:

Select House Battery 1 to 6

AC Out Connection:

Select AC Load 1 to 10

AC1 Connection:

Select Grid 1 to 10,

Gen 1 to 10

AC2 Connection:

Select Grid 1 to 10,

Gen 1 to 10

Conext XW+ Owner's Guide NA (975-0240-01-01).book Page 46 Monday, November 27, 2017 10:00 AM