Conext XW Pro Installation Guide

Upgrading the Firmware
To upgrade the firmware, refer to instructions in the Conext Gateway Owner's Guide
(975-0806-01-01). If you do not have this guide, download it from http://solar.schneider-
electric.com.
To upgrade the firmware:
1. Download the latest firmware for your Conext XW Pro Inverter/Charger from
http://solar.schneider-electric.com and save it onto your computer.
2. Using your computer's web browser, navigate to the Conext Gateway's web
application, log in, and go to the applicable device page.
3. In the Firmware page, follow the on-screen instructions.
4. Record the new firmware version for future reference.
Converting Split-phase to Single-phase Conext XW Pro Installation Guide
990-91228A-01 This manual is intended for use by qualified personnel 130