Conext XW Pro Installation Guide

Knockout Selection 28
Air Filter and AUX Port Connector Installation 29
Wall-Mounting 30
Installing the Mounting Plate 31
Wall-Mounting the Conext XW Pro and PDP 32
Installing the XW Conduit Box 34
Communications Network Preparation 36
Battery Bank Preparation 37
Battery Bank Requirements 38
Battery Cable Requirements 38
Torque Values 40
Torque Values for the Conext XW Pro 40
Torque Values for the Power Distribution Panel (PDP) 40
Wiring 42
Removing the AC Access Panel and PDP Internal Faceplates 44
Removing AC Access Panel 44
Removing Power Distribution Panel Internal Faceplate 45
Communication Ports and BTS Port 47
AUX Port 47
Wiring the Conext XW Pro with a PDP 50
Grounding the Conext XW Pro Inverter/Charger 50
Grounding the DC System 50
Installing the Battery Temperature Sensor 51
Making DC Connections 53
Making AC Connections 57
AC System Bonding 60
Basic Functional Test – Single Inverter 68
Confirming All Connections 68
Applying DC Power to the Inverter 69
Enabling the Inverter 69
Checking AC Voltage 72
Confirming Battery Charger Operation 72
Wiring Additional Conext XW Pro units with a PDP 74
Pre-Installation Steps 74
Grounding Conext XW Pro Inverter/Charger 76
Installing a Dual Inverter/Charger System 76
Installing Bypass Interlock Plate 81
Installing a Triple Inverter/Charger System 81
Conext XW Pro Installation Guide
13 This manual is intended for use by qualified personnel 990-91228A-01