Conext XW Pro Installation Guide

The neutral inputs are connected to each other, requiring only one neutral connection
when installed with a Power Distribution Panel (PDP). Without the PDP, additional
neutral connections may be required at the input sources.
Grounding AC Equipment
See "Torque Values for the Conext XW Pro" on page40 for torque values for the AC
terminal and AC ground bar. See"Torque Values for the Power Distribution Panel (PDP)"
on page40 for torque requirements for the ground bar in the Conext XW Pro Power
Distribution Panel.
Figure 31 AC Equipment Grounding With the PDP
Conext XW Pro Installation Guide Wiring
59 This manual is intended for use by qualified personnel 990-91228A-01