Conext XW Pro Installation Guide
Note: Unless the inverter/charger settings have been changed, the inverter will charge
as if it has a large (> 440 Ah) flooded battery bank (factory default setting). In newly
installed systems, adjust the battery charging set points to match the batteries as
installed.
This completes the functional test. Ifany of the internal set points need to be adjusted on
the Conext XW Pro, consult the configuration chapter of the Owner's Guide.
Figure 42 Functional Test for Single Inverter Systems
Conext XW Pro Installation Guide Wiring
73 This manual is intended for use by qualified personnel 990-91228A-01