Conext XW Pro Installation Guide

Note: Before connecting the DC cables from the PDP to the battery, perform the
procedures in "AC Wiring for a Triple-Inverter System" on page85.
2. Connect the positive battery cable for INV2 (included with the Connection Kit for
INV2 INV3 PDP) to the top terminal on the second DC disconnect/breaker.
3. Connect the negative battery cable for INV2 (included with the Connection Kit for
INV2 INV3 PDP) to the DC Negative Bus.
4. Connect the positive battery cable to the positive terminal on the second Conext XW
Pro (INV2) and the negative battery cable to the negative terminal on INV2.
5. Connect the positive battery cable for INV3 (included with the Connection Kit for
INV2 INV3 PDP) to the top terminal on the third DC disconnect/breaker.
6. Connect the negative battery cable for INV3 (included with the Connection Kit for
INV2 INV3 PDP) to the DC Negative Bus.
7. Connect the positive battery cable to the positive terminal on INV3 and the negative
battery cable to the negative terminal on INV3.
Note: Before connecting the DC cables from the PDP to the battery, perform the
procedures in "AC Wiring for a Triple-Inverter System" on page85.
Conext XW Pro Installation Guide Wiring
83 This manual is intended for use by qualified personnel 990-91228A-01