Conext XW Pro Installation Guide

Conext XW Pro Inverter/Charger Grounding
WARNING
UNGROUNDED EQUIPMENT
Equipment ground terminals must be reliably connected to ground by appropriately sized
grounding conductors. All installations must comply with national and local codes. Consult
local and national codes for specific grounding and bonding requirements.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
The Conext XW Pro is provided with ground terminals that must be reliably connected to
ground (protective earth) by appropriately sized equipment grounding conductors.
System grounding for the AC and DC systems must be done according to all applicable
NEC and local installation codes.
For more information about system grounding, see "Grounding the DC System" on
page50 and "Grounding AC Equipment" on page59.
Conext XW Pro Installation Guide Wiring
91 This manual is intended for use by qualified personnel 990-91228A-01