XW PRO Li-ion Battery Solution Guide

NOTICE
RISK OF BATTERY DAMAGE
Consult the BMS manufacturer's information for resolving any faults or errors that occur. Each
BMS will have its own instructions for resolving issues.
Failure to follow these instructions can result in equipment damage.
CAN BMS Discovery
CAN BMS systems that are supported by the Conext Gateway have auto-detection, where
the Conext Gateway will see the messages from the BMS and detect the battery.
NOTE: Only 500 kbps speed is supported for CAN BMS.
1. After successful login, click Setup along the top bar.
2. On successful device detection, the number of devices will be shown.
3. Navigate to Devices and click Device Overview. On successful communication,
various user information is available.
Modbus BMS Discovery
Modbus BMS systems can be detected through a Modbus discovery feature from the
Conext Gateway UI during commissioning. Once completed the device will be remembered
unless manually removed from the device list in the Conext Gateway.
1. After successful login, click Setup along the top bar.
2. Click Configuration on the left-hand side, and then click Modbus settings.
3. Configure the Modbus settings. This should be same as the Modbus BMS settings.
990-6359A This manual is intended for use by qualified personnel 7
XW Pro Li-ion Battery Solution Guide