XW PRO Li-ion Battery Solution Guide
Table Of Contents
4. After configuring the Modbus settings, click Device Detection on the left-hand side.
5. Under Detect Devices, enter the address range of the Modbus device and click Detect.
This should trigger device detection.
6. On successful device detection , the number of devices will be shown. Navigate to
Devices and click Device Overview. On successful communication, various user
information is available.
BMS Association
1. Click the BMS device to open BMS Status information.
2. Check the status information to validate various data parameters.
990-6359A This manual is intended for use by qualified personnel 8
XW Pro Li-ion Battery Solution Guide