XW PRO Li-ion Battery Solution Guide

3. Click Configuration and then click Device Association.
4. In the Devices section click Inverter/Chargers. Click the respective XW Pro and click
Configuration > Associations menu set the Battery Association to same bank as
BMS.
System Configuration
NOTICE
RISK OF DAMAGE TO THE BATTERY AND BATTERY INVERTER
Always configure Battery Model to match the actual battery model installed in the system. The
system is configured automatically with the settings which are intended to operate the batteries
within their recommended ranges and minimize BMS tripping.
Failure to follow these instructions can result in equipment damage.
990-6359A This manual is intended for use by qualified personnel 9
XW Pro Li-ion Battery Solution Guide