Conext XW+ 230V Installation Guide

Introduction
1–2 975-0714-01-01
This manual is for use by qualified personnel only
Overview
The Conext XW+ is a modular building block sine-wave inverter/charger that can
be used for residential and commercial battery based off-grid, grid backup, and
grid interactive applications.
The Conext XW+ is a self-contained DC to AC inverter, battery charger, and
integrated AC transfer switch. It is configurable in a hybrid system to operate with
generators and renewable energy sources. These configurations are capable of
extending battery based off-grid/backup autonomy.
Inside the Box
Conext XW+ Inverter/Charger and System Components
The following system components are included in this package. If any items are
missing, contact your authorized dealer.
Battery Temperature Sensor
The Battery Temperature Sensor (BTS) included in this package monitors the
temperature of the battery bank and adjusts the charging accordingly. For
installation instructions, see “Battery Temperature Sensor Installation” on page 3–
9 of this Guide.
Figure 1-1 Conext XW+ Inverter/Charger and System Components
Network terminator
DC terminal covers
Battery Temperature
Sensor (BTS)
Air filter
Mounting plate
Conext XW+ Inverter/Charger
AUX port connector
and hardware