Conext XW+ 230V Installation Guide

iii
This manual is for use by qualified personnel only
About This Guide
Purpose
The purpose of this Installation Guide is to provide explanations and procedures
for installing the Schneider Electric Conext XW+ Inverter/Charger.
Scope
The Guide provides safety guidelines, detailed planning, and procedures for
installing the Conext XW+ Inverter/Charger and related system components. It
does not provide details about configuration, operation, maintenance, or
troubleshooting. See the Operation Guide or Owner’s Guide of each device for
this information. This Guide does not provide details about particular brands of
batteries, photoelectric cells, or generators. Consult individual battery
manufacturers for this information.
Audience
This Installation Guide is intended for any qualified personnel planning to install
the Conext XW+ Inverter/Charger and related system components. Certain
configuration tasks should only be performed by qualified personnel in
consultation with your local utility and/or an authorized dealer. Electrical
equipment should be installed, operated, serviced, and maintained only by
qualified personnel. Keep unqualified personnel away from batteries. Servicing
of batteries must only be performed or supervised by qualified personnel with
knowledge of batteries and their required precautions.Qualified personnel have
training, knowledge, and experience in:
• Installing electrical equipment
• Applying applicable installation codes
• Analyzing and reducing the hazards involved in performing electrical work
• Installing and configuring batteries
• Selecting and using Personal Protective Equipment (PPE)
No responsibility is assumed by Schneider Electric for any consequences arising
out of the use of this material.