Conext XW+ 230V Installation Guide

Basic Functional Test – Single Inverter
975-0714-01-01 3–31
This manual is for use by qualified personnel only
To enable the inverter:
◆ On the inverter information panel, simultaneously press the STARTUP/
SHUTDOWN button and the Equalize button. The Conext XW+ is now enabled,
and  (enabled) is briefly displayed on the inverter information panel, as
shown in Figure 3-17.
To disable the inverter:
◆ On the inverter information panel, simultaneously press the STARTUP/
SHUTDOWN button and the Equalize button. The Conext XW+ is now disabled,
and  (disabled) is briefly displayed on the inverter information panel,
followed by "" (as shown in Figure 3-18).
Figure 3-17 Enabled mode
Equalize button STARTUP/SHUTDOWN button
Figure 3-18 Transition to disabled mode