Specifications

Connection Example
140
890USE17700 September 2003
The following table describes the cabling guidelines for the network shown in the
figure above:
Type of Connection Cabling Guidelines
direct connection between a PC host
(with an Ethernet card) and the
STB NIP 2212
crossover cable
through a switch as recommended by
Schneider Electric
shielded (STP) or unshielded (UTP) electrical, twisted
pair Category (CAT5) cabling (See STB NIP 2212
Network Interface, p. 26)
Note: Compatible switch, hub, connector, and cable selections are described in the
Transparent Factory Network Design and Cabling Guide (490 USE 134 00).