Specifications

The STB NIP 2212 NIM
34
890USE17700 September 2003
Connections An STB XCA 4002 programming cable must be used to connect the computer
running the Advantys configuration software or a Modbus-capable HMI panel to the
NIM via the CFG port.
The following table describes the specifications for the programming cable:
Parameter Description
model STB XCA 4002
function connection to device running Advantys configuration
software
connection to HMI panel
communications protocol Modbus (either RTU or ASCII mode)
cable length 2 m (6.23 ft)
cable connectors eight-receptacle HE-13 (female)
nine-receptacle SUB-D (female)
cable type multiconductor