Specifications

STB NIP 2212 Web Server

890USE17700 September 2003

Restoring

Default

Parameters from

the Web

Use the following procedure to reconfigure the STB NIP 2212 with its default

IP parameters (See Deriving an IP Address from a Media Access Control (MAC)

Address, p. 61) from the web. Note: Your STB NIP 2212 cannot have a role name.

Step Action Comment

1 Open the STB NIP 2212 web site.

2 Click on the Configuration tab to display

the Configuration menu.

3 Select the Configured IP option. The Configured IP web page (See

Sample Configured IP Web Page, p. 73)

opens.

4 Click on the Default button. The IP address parameters are restored

to their default values.

The address is based on the 48-bit MAC

address that was programmed into the

STB NIP 2212 when it was

manufactured.

5 Click on the Save button to save the

address to Flash memory and in RAM.

Note: The LAN ST LED (See Ethernet

Communications LEDs, p. 31) on the

NIM blinks six times if the STB NIP 2212

default address is in use. If the address is

a duplicate, the LAN ST LED blinks four

times.

6 Click on the Configuration tab to return to

the Configuration menu.

7 Select the Reboot option (See About the

Reboot Option, p. 77).

8 At the Reboot now? prompt, click on the

OK button.

9 Click on the OK button at the confirmation

prompt, "Are you sure?"