Instruction manual

Verifying an Island Configuration
66
890USE18000 September 2003
Printing a Report
Overview Ten different types of reports can be printed from the software:
workspace information
island information
the fieldbus I/O image
the Modbus I/O image
a reflex action listing
resource utilization statistics
power resource details
configuration resource details
module details
annotations
Procedure To print a report:
Step Action
1 Do one of the following:
Click on the button.
Select Print from the File pull-down menu.
The Print dialog appears.
2In the Print field in the dialog (item 1 below), select the islands about which you want
information. Click either All, Active Island, or Select Islands.
3 In the Print Items field in the dialog (item 2 below), check the boxes next to the reports
you want to print. If you want all the reports, check Select All (item 3 below).
4 Check or uncheck the Collate and/or Export to File check boxes (item 4 below).
5 Click Preview (item 5 below) if you want to see the reports before you print them.
6 Click Setup (item 6 below) if you want to change the printer settings.
7 Click OK to print or Cancel (item 7 below) to cancel the print job.