Information

SCHN-00033-V01.03-EN - PEP ECOPASSPORT
2 12/2016
General information
Representative product
Residual Current Circuit Breaker with overcurrent protection 2-pole 10kA, C
curve, rated current of 16A.
Description of the product
Circuit breaker used to protect circuit from overloads and short-circuits.
Description of the range
Residual Current Circuit Breaker family with overcurrent protection 2 poles, B and
C tripping curve, voltage 230 V and rated current from 10A to 32A.
Functional unit
To protect installation against overloads and short-circuits in circuit with assigned
voltage of 230 V and rated current from 10A to 32A during 20 years. This
protection is ensured in accordance with the following parameters:
- number of poles 2
- rated breaking capacity 10kA
- tripping curve B - C
- degree of protection IP20 alone - IP40 with cabinet.
Reference product mass
The total mass of the product is 264,43g, without its packaging is 216,19g, while
the packaging is 48,24g. Composition is shown in chart below.
Products of this range are designed in conformity with the requirements of the RoHS directive (European Directive
2011/65/EU of 8 June 2011) and do not contain, or only contain in the authorised proportions, lead, mercury,
cadmium, hexavalent chromium or flame retardants (polybrominated biphenyls - PBB, polybrominated diphenyl
ethers - PBDE) as mentioned in the Directive.
As the products of the range are designed in accordance with
the RoHS Directive (European Directive 2002/95/EC
of 27 January 2003), they can be incorporated without any restriction in an assembly or an installation subject to this
Directive. Details of ROHS and REACH substances information are available on the Schneider-Electric Green
Premium website.
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
Constituent materials
Substance assessment