Datasheet

ManualsBrandsSCHNEIDER ELECTRIC ManualsRack & DIN Rail Mount PSUsRail mounted PSU (DIN) 2.1 A 25 W

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 7, 2018

Product data sheet

Characteristics

ABL8MEM12020

regulated SMPS - 1 or 2-phase - 100..240 V AC -

12 V - 2 A

Main

Range of product Phaseo

Product or component type Power supply

Power supply type Regulated switch mode

Input voltage 100...240 V AC phase to phase, terminal(s): L1-L2

100...240 V AC single phase, terminal(s): N-L1

120...250 V DC

Output voltage 12...15 V DC

Rated power in W 25 W

Input protection type Integrated fuse (not interchangeable)

Power supply output current 2.1 A

Output protection type Against short-circuits

Ambient air temperature for operation -25...55 °C without

55...70 °C with

Complementary

Input voltage limits 85...264 V

Network frequency 47...63 Hz

Inrush current <= 20 A

Cos phi 0.5

Efficiency 80 %

Output voltage limits 11.4...15 V adjustable

Power dissipation in W 6.2 W

Current consumption 0.35 A at 240 V

0.6 A at 100 V

Line and load regulation +/- 3 %

Residual ripple 250 mV

Holding time >= 10 ms at 100 V

Connections - terminals Screw type terminals for input connection, connection capacity: 2 x 0.14...2 x 2.5 mm² AWG

26...AWG 14

Screw type terminals for output connection, connection capacity: 4 x 0.14...4 x 2.5 mm² AWG

26...AWG 14

Marking CE

Mounting support 35 x 7.5 mm symmetrical DIN rail

Panel 2 screws, diameter : 4 mm

Summary of content (6 pages)

PAGE 1
ABL8MEM12020 Product data sheet Characteristics regulated SMPS - 1 or 2-phase - 100..240 V AC 12 V - 2 A Range of product Phaseo Product or component type Power supply Power supply type Regulated switch mode Input voltage 100...240 V AC phase to phase, terminal(s): L1-L2 100...240 V AC single phase, terminal(s): N-L1 120...250 V DC Output voltage 12...15 V DC Rated power in W 25 W Input protection type Integrated fuse (not interchangeable) Power supply output current 2.
PAGE 2
35 x 15 mm symmetrical DIN rail Operating position Vertical Operating altitude 2000 m Output coupling Parallel Series Name of test Harmonic current emission conforming to EN/IEC 61000-3-2 Conducted emissions on the power line conforming to EN 55022 Class B Electrostatic discharges conforming to EN/IEC 61000-4-2 Emission conforming to EN 50081-1 Induced electromagnetic field conforming to EN/IEC 61000-4-6 Primary outage conforming to IEC 61000-4-11 Radiated electromagnetic field conforming to EN/IEC 6
PAGE 3
ABL8MEM12020 Product data sheet Dimensions Drawings Regulated Switch Mode Power Supplies Dimensions a in mm a in in. a1 in mm a1 in in. ABL8MEM05040 54 2.12 42 1.65 ABL8MEM12020 54 2.12 42 1.65 ABL8MEM24003 36 1.41 24 0.94 ABL8MEM24006 36 1.41 24 0.94 ABL8MEM24012 54 2.12 42 1.65 ABL7RM24025 74 2.91 60 2.
PAGE 4
Product data sheet Connections and Schema Regulated Switch Mode Power Supply Internal Wiring Diagram 4 ABL8MEM12020
PAGE 5
ABL8MEM12020 Product data sheet Connections and Schema Regulated Switch Mode Power Supplies Series or Parallel Connection Series Connection (1) Two Shottky diodes Imin = power supply In and Vmin = 50 V Parallel Connection Family Series Parallel ABL 7RM/8MEM 2 products max. 2 products max. Series or parallel connection is only recommended for products with identical references.
PAGE 6
Product data sheet Performance Curves ABL8MEM12020 Regulated Switch Mode Power Supplies Derating The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced. The nominal ambient temperature for the Modular range of Phaseo power supplies is 55°C.