Datasheet

ManualsBrandsSCHNEIDER ELECTRIC ManualsRack & DIN Rail Mount PSUsRail mounted PSU (DIN) 10 A

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 7, 2018

Product data sheet

Characteristics

ABL8RPS24100

regulated SMPS - 1 or 2-phase - 100..500 V - 24

V - 10 A

Main

Range of product Phaseo

Product or component type Power supply

Power supply type Regulated switch mode

Input voltage 100...120 V AC single phase, terminal(s): N-L1

200...500 V AC phase to phase, terminal(s): L1-L2

Output voltage 24 V DC

Rated power in W 240 W

Provided equipment Power factor correction filter conforming to IEC 61000-3-2

Power supply output current 10 A

Output protection type Against overload, protection technology: manual or automatic reset

Against overvoltage, protection technology: 30...32 V, manual reset

Against short-circuits, protection technology: manual or automatic reset

Against undervoltage, protection technology: tripping if U < 21.6 V

Thermal, protection technology: automatic reset

Ambient air temperature for operation 50...60 °C with

-25...50 °C without

Complementary

Input voltage limits 170...550 V

85...132 V

Network frequency 47...63 Hz

Inrush current <= 30 A for 2 ms

Cos phi 0.68 at 240 V

0.69 at 120 V

Efficiency 87 %

Output voltage limits 24...28.8 V adjustable

Power dissipation in W 31 W

Line and load regulation 1...3 %

Holding time >= 120 ms at 400 V

>= 20 ms at 100 V

Summary of content (9 pages)

PAGE 1
ABL8RPS24100 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications regulated SMPS - 1 or 2-phase - 100..500 V - 24 V - 10 A Main Range of product Phaseo Product or component type Power supply Power supply type Regulated switch mode Input voltage 100...120 V AC single phase, terminal(s): N-L1 200...
PAGE 2
>= 40 ms at 240 V Permissible temporary current boost 1.5 x In for 4 s Connections - terminals Screw type terminals for input connection, connection capacity: 3 x 0.5...3 x 4 mm² AWG 22...AWG 12 Screw type terminals for input ground connection, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...AWG 12 Screw type terminals for output connection, connection capacity: 4 x 0.5...4 x 4 mm² AWG 22...AWG 12 Screw type terminals for output ground connection, connection capacity: 1 x 0.5...1 x 4 mm² AWG 22...
PAGE 3
RoHS (date code: YYWW) Compliant - since 0501 - Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Available Product environmental Product end of life instructions Available End of life manual Contractual warranty Warranty period 18 months 3
PAGE 4
ABL8RPS24100 Product data sheet Dimensions Drawings Regulated Switch Mode Power Supplies Dimensions ABL 8 a in mm a in in. b in mm b in in. RPS24030 120 4.72 44 1.73 RPS24050 120 4.72 56 2.20 RPS24100 140 5.51 85 3.34 RPM24200 140 5.51 145 5.70 WPS24200 155 6.10 95 3.74 WPS24400 155 6.10 165 6.
PAGE 5
Product data sheet Connections and Schema ABL8RPS24100 Regulated Switch Mode Power Supply Internal Wiring Diagram 5
PAGE 6
Product data sheet Connections and Schema Regulated Switch Mode Power Supply Line Supply Wiring Diagram Single-phase (L-N) 100 to 120 V Phase-to-phase (L1-L2) 200 to 500 V Single-phase (L-N) 200 to 500 V 6 ABL8RPS24100
PAGE 7
ABL8RPS24100 Product data sheet Connections and Schema Regulated Switch Mode Power Supplies Series or Parallel Connection Series Connection (1) Two Shottky diodes Imin = power supply In and Vmin = 50 V Parallel Connection Family Series Parallel ABL 8RPS/8RPM/8WPS 2 products max. (1) 2 products max. Series or parallel connection is only recommended for products with identical references.
PAGE 8
Product data sheet Performance Curves ABL8RPS24100 Regulated Switch Mode Power Supplies Derating The ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. If the temperature around the electronic components is too high, their life will be significantly reduced. The nominal ambient temperature for the Universal range of Phaseo power supplies is 50°C. Above this temperature, derating is necessary up to a maximum temperature of 60°C.
PAGE 9
Product data sheet Performance Curves ABL8RPS24100 Regulated Switch Mode Power Supply Load Limit Manual Reset Protection Mode (1) Boost 4s Automatic Reset Protection Mode (1) Boost 4s “Boost” Repeat Accuracy This type of operation is described in detail in the user manual, which can be downloaded from the website.