Datasheet

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
Sep 14, 2018
1
Product data sheet
Characteristics
ATS01N212QN
soft starter for asynchronous motor - ATS01 - 12
A - 380..415V - 5.5 KW
Main
Range of product Altistart 01
Product or component type Soft starter
Product destination Asynchronous motors
Product specific application Simple machine
Device short name ATS01
Network number of phases 3 phases
[Us] rated supply voltage 380...415 V - 10...10 %
Motor power kW 5.5 kW 3 phases 380...415 V
IcL starter rating 12 A
Utilisation category AC-53B EN/IEC 60947-4-2
Current consumption 60 A at nominal load
Type of start Start with voltage ramp
Power dissipation in W 124 W in transient state
4 W at full load and at end of starting
Complementary
Assembly style With heat sink
Function available Integrated bypass
Supply voltage limits 342...456 V
Supply frequency 50...60 Hz - 5...5 %
Network frequency 47.5...63 Hz
Output voltage <= power supply voltage
[Uc] control circuit voltage Built into the starter
Starting time Adjustable from 1 to 10 s
Deceleration time symb Adjustable from 1 to 10 s
Starting torque 30...80 % of starting torque of motor connected directly on the line supply
Discrete input type Logic LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA 27 kOhm
Discrete input voltage 24...40 V
Discrete input logic Positive LI1, LI2, BOOST < 5 V and <= 0.2 mA > 13 V >= 0.5 mA
Discrete output current 2 A DC-13
3 A AC-15
Discrete output type Open collector logic LO1 end of starting signal