Datasheet

ManualsBrandsSCHNEIDER ELECTRIC ManualsDrive EngineeringFrequency inverter 1-phase

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 7, 2018

Product data sheet

Characteristics

ATV320U06M2C

variable speed drive ATV320 - 0.55kW -

200...240V - 1 phase - compact

Main

Range of product Altivar Machine ATV320

Product or component type Variable speed drive

Product specific application Complex machines

Device short name ATV320

Format of the drive Compact

Product destination Asynchronous motors

Synchronous motors

EMC filter Class C2 EMC filter integrated

IP degree of protection IP20 conforming to EN/IEC 61800-5-1

Degree of protection UL type 1 with UL type 1 conformity kit

Type of cooling Fanless

Network number of phases 1 phase

[Us] rated supply voltage 200...240 V (- 15...10 %)

Supply frequency 50...60 Hz (- 5...5 %)

Motor power kW 0.55 kW for heavy duty

Motor power hp 0.75 hp for heavy duty

Line current 7.9 A at 200 V for heavy duty

6.7 A at 240 V for heavy duty

Prospective line Isc <= 1 kA

Apparent power 1.6 kVA at 240 V for heavy duty

Continuous output current 3.7 A at 4 kHz for heavy duty

Maximum transient current 5.6 A during 60 s for heavy duty

Asynchronous motor control profile Voltage/Frequency ratio, 2 points

Voltage/Frequency ratio, 5 points

Flux vector control without sensor, standard

Voltage/Frequency ratio - Energy Saving, quadratic U/f

Flux vector control without sensor - Energy Saving

Synchronous motor control profile Vector control without sensor

Speed drive output frequency 0.1...599 Hz

Summary of content (11 pages)

PAGE 1
ATV320U06M2C Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications variable speed drive ATV320 - 0.55kW 200...
PAGE 2
Nominal switching frequency 4 kHz Switching frequency 4...16 kHz with current derating 2...
PAGE 3
Local signalling 1 LED green for CANopen run 1 LED red for CANopen error 1 LED red for drive fault Width 72 mm Height 143 mm 188 mm with EMC plate Depth 138 mm Product weight 1.1 kg Analogue input number 3 Analogue input type Voltage (AI1): 0...10 V DC, impedance 30000 Ohm, resolution 10 bits Bipolar differential voltage (AI2): +/- 10 V DC, impedance 30000 Ohm, resolution 10 bits Current (AI3): 0...
PAGE 4
Washing machines other application Hoisting standard crane - travelling or trolley Power range 0.55...1 kW 200...240 V 1 phase Motor starter type Variable speed drive Environment Isolation Between power and control terminals Insulation resistance > 1 mOhm at 500 V DC for 1 minute to earth Power dissipation in W 41.
PAGE 5
Product data sheet Dimensions Drawings ATV320U06M2C Dimensions (1) Right view (2) Front view (3) Front view with EMC plate 5
PAGE 6
Product data sheet Mounting and Clearance ATV320U06M2C Mounting Types Mounting Type A: Individual with Ventilation Cover Only Possible at Ambient Temperature Less or Equal to 50 °C (122 °F) Mounting Type B: Side by Side, Ventilation Cover Removed Mounting Type C: Individual, Ventilation Cover Removed For Operation at Ambient Temperature Above 50 °C (122 °F) 6
PAGE 7
Product data sheet Connections and Schema ATV320U06M2C Connection Diagrams Diagram with Line Contactor Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1.
PAGE 8
Product data sheet Connections and Schema Control Connection Diagram in Source Mode (1) (2) (3) (4) Analog output Analog inputs Reference potentiometer (10 kOhm maxi) Digital inputs 8 ATV320U06M2C
PAGE 9
Product data sheet Connections and Schema ATV320U06M2C Digital Inputs Wiring The logic input switch (SW1) is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs. Switch SW1 set to “Source” position and use of the output power supply for the DIs. Switch SW1 set to “Source” position and use of an external power supply for the DIs. Switch SW1 set to “Sink Int” position and use of the output power supply for the DIs.
PAGE 10
Product data sheet Performance Curves ATV320U06M2C Derating Curves Derating curve for the nominal drive current (In) as a function of temperature and switching frequency (SF).
PAGE 11
ATV320U06M2C Product data sheet Motor Starter BOM Our Proposal: Circuit Breaker + Contactor + Drive for Motor Power 0,55 kW and 200 VAC Motor power ICU (kW) (kA) 0,55 > 100 Breaker Contactor (*) Motor Starter LC1D09P7 ATV320U06M2C GV2L14 Non contractual pictures. (*) You can select the contactor proposed or variants. Please consider examples hereafter or follow the link to the complete offer. Motor power Coil voltage kW VAC - 50/60 Hz 0,55 LC1D09 ..