Datasheet

ManualsBrandsSchneider Electric ManualsAutomationFrequenty Converter, ATV320, 4kW, 5hp, 380 ... 500V

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

May 7, 2018

Product data sheet

Characteristics

ATV320U40N4C

variable speed drive ATV320 - 4kW - 380...500V -

3 phase - compact

Main

Range of product Altivar Machine ATV320

Product or component type Variable speed drive

Product specific application Complex machines

Device short name ATV320

Format of the drive Compact

Product destination Synchronous motors

Asynchronous motors

EMC filter Class C2 EMC filter integrated

IP degree of protection IP20 conforming to EN/IEC 61800-5-1

Degree of protection UL type 1 with UL type 1 conformity kit

Type of cooling Fan

Network number of phases 3 phases

[Us] rated supply voltage 380...500 V (- 15...10 %)

Supply frequency 50...60 Hz (- 5...5 %)

Motor power kW 4 kW for heavy duty

Motor power hp 5 hp for heavy duty

Line current 13.8 A at 380 V for heavy duty

10.6 A at 500 V for heavy duty

Prospective line Isc <= 5 kA

Apparent power 9.2 kVA at 500 V for heavy duty

Continuous output current 9.5 A at 4 kHz for heavy duty

Maximum transient current 14.3 A during 60 s for heavy duty

Asynchronous motor control profile Voltage/Frequency ratio - Energy Saving, quadratic U/f

Flux vector control without sensor - Energy Saving

Voltage/Frequency ratio, 2 points

Flux vector control without sensor, standard

Voltage/Frequency ratio, 5 points

Synchronous motor control profile Vector control without sensor

Speed drive output frequency 0.1...599 Hz

Summary of content (11 pages)

PAGE 1
ATV320U40N4C Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications variable speed drive ATV320 - 4kW - 380...
PAGE 2
Nominal switching frequency 4 kHz Switching frequency 4...16 kHz with current derating 2...
PAGE 3
Local signalling 1 LED green for CANopen run 1 LED red for CANopen error 1 LED red for drive fault Width 140 mm Height 184 mm 227.9 mm with EMC plate Depth 158 mm Product weight 2.2 kg Analogue input number 3 Analogue input type Voltage (AI1): 0...10 V DC, impedance 30000 Ohm, resolution 10 bits Bipolar differential voltage (AI2): +/- 10 V DC, impedance 30000 Ohm, resolution 10 bits Current (AI3): 0...
PAGE 4
Washing machines other application Hoisting standard crane - travelling or trolley Power range 4...6 kW 380...440 V 3 phases 4...6 kW 480...500 V 3 phases Motor starter type Variable speed drive Environment Isolation Between power and control terminals Insulation resistance > 1 mOhm at 500 V DC for 1 minute to earth Noise level 52 dB conforming to 86/188/EEC Power dissipation in W 112 W (fan) at 380 V, 4 kHz Volume of cooling air 37.
PAGE 5
Product data sheet Dimensions Drawings ATV320U40N4C Dimensions (1) Right view (2) Front view (3) Front view with EMC plate 5
PAGE 6
Product data sheet Mounting and Clearance ATV320U40N4C Mounting Types Mounting Type A: Individual with Ventilation Cover Only Possible at Ambient Temperature Less or Equal to 50 °C (122 °F) Mounting Type B: Side by Side, Ventilation Cover Removed Mounting Type C: Individual, Ventilation Cover Removed For Operation at Ambient Temperature Above 50 °C (122 °F) 6
PAGE 7
Product data sheet Connections and Schema ATV320U40N4C Connection Diagrams Diagram with Line Contactor Connection diagrams conforming to standards EN 954-1 category 1 and IEC/EN 61508 capacity SIL1, stopping category 0 in accordance with standard IEC/EN 60204-1.
PAGE 8
Product data sheet Connections and Schema Control Connection Diagram in Source Mode (1) (2) (3) (4) Analog output Analog inputs Reference potentiometer (10 kOhm maxi) Digital inputs 8 ATV320U40N4C
PAGE 9
Product data sheet Connections and Schema ATV320U40N4C Digital Inputs Wiring The logic input switch (SW1) is used to adapt the operation of the logic inputs to the technology of the programmable controller outputs. Switch SW1 set to “Source” position and use of the output power supply for the DIs. Switch SW1 set to “Source” position and use of an external power supply for the DIs. Switch SW1 set to “Sink Int” position and use of the output power supply for the DIs.
PAGE 10
Product data sheet Performance Curves Derating Curves In : SF : 10 40 °C (104 °F) - Mounting type A, B and C 50 °C (122 °F) - Mounting type C 60 °C (140 °F) - Mounting type C Nominal Drive Current Switching Frequency ATV320U40N4C
PAGE 11
ATV320U40N4C Product data sheet Motor Starter BOM Our Proposal: Circuit Breaker + Contactor + Drive for Motor Power 4 kW and 380 VAC Motor power ICU (kW) (kA) 4 50 Breaker Contactor (*) Motor Starter LC1D09P7 ATV320U40N4C GV2L16 Non contractual pictures. (*) You can select the contactor proposed or variants. Please consider examples hereafter or follow the link to the complete offer. Motor power Coil voltage kW VAC - 50/60 Hz 4 LC1D09 .. Motor power Coil voltage kW VDC 4 LC1D09 ..