Manual

52 3-phase stepper motor
4 Installation BRS3
0198441113730, V2.02, 03.2011
@ WARNING
GREAT MASS OR FALLING PARTS
• Consider the mass of the axis when mounting the product. It may
be necessary to use a crane.
• Mount the product in such a way (tightening torque, securing
screws) that the axis and mounted parts cannot come loose even
in the case of fast acceleration or continuous vibration.
• Note that axes subject to external forces (vertical axes) may lower
unexpectedly.
Failure to follow these instructions can result in death, serious
injury or equipment damage.
@ WARNING
HOT SURFACES
The heat sink at the product may heat up to over 100°C (212°F) during
operation.
• Avoid contact with the hot heat sink.
• Do not allow flammable or heat-sensitive parts in the immediate
vicinity.
• Consider the measures for heat dissipation described.
Failure to follow these instructions can result in death or serious
injury.
@ CAUTION
DAMAGE CAUSED BY IMPROPER APPLICATION OF FORCES
If the motor is improperly subjected to loads, it can be damaged or fall
down.
• Do not step onto the motor.
• Avoid improper use by means of safeguards at the machine or
safety instructions.
Failure to follow these instructions can result in injury or equip-
ment damage.